Message

Message： Hello, I have a problem, after I finish the nc file and want to start the cnc engraving, the machine starts 1 cm off than the origin I set. Please tell me what I’m doing wrong, thank you! Catalina 2017/10/17

Reply： pls check the origin point you output the toolpath. ( 2017/10/17 )

Message： Hi, please can you tell me how to draw and add a tool path for a dog-bone / T-bone joint such as is these images: http://discourse.fablabelpaso.org/t/basics-of-cnc-joinery/18 Thank you. Alex Hutchings 2017/10/09

Reply： profile machining. ( 2017/10/09 )

Message： i installed 10.7 “failed to create empty document” what is this? Anonymous 2017/10/08

Reply： V9 dongle can nor support V10.7. ( 2017/10/08 )

Message： Hello. I have an old version of Ucancam that works on Windows XP, on the PC where the router software is located. If I upgrade Ucancam to the current version, can I install it also on my old XP? Can I use the program simultaneously on two computers, one XP and one with Windows 7 or higher? Can I open the same file on both operating systems? Rodrigo 2017/09/29

Reply： if your old version of Ucancam is V10. that is no problem. ( 2017/09/29 )

Message： we have the key of version 8, it runs on windows 10? If not then how can I get a new key? Ruslan 2017/09/29

Reply： V8 can not run on Win 10. but V10 can support win 10. pls order from http://www.ucancam.com/purchasing.asp ( 2017/09/29 )

Message： Hello. With which Windows is running UcanCam? Ruslan 2017/09/28

Reply： Win XP, 7, 8 ,10 ( 2017/09/28 )

Message： I am getting an error “error in setting position x of origin, please reset” Can anyone tell me how to fix this? Brian 2017/09/27

Reply： what function are you using? ( 2017/09/27 )

Message： I have just installed UCancam V10 on my PC. For some reason it won’t let me import a DXF file into it, it’s telling me that there’s an error. Is there something I’ve got to do to enable imports or is there something I can try to see if it will work? This is really urgent and unfortunately I can’t figure it out; any advice would be great. Thanks. Chel 2017/09/27

Reply： be sure the dxf is nor shared by other application. ( 2017/09/27 )

Message： New version Ucancam Pro Version V10.7-170809 is changing a 10x10mm square to 21.1×21.1 with the post processor. Am I missing something?? Ivan 2017/09/18

Reply： unistall, and reinstall. ( 2017/09/18 )

Message： Can you please tell me where to find 3D models that is supported by Ucancam. Gary Smith 2017/09/12

Reply： *.stl, *. obj, *.igs file ,ucancam pro can support. ( 2017/09/12 )

GuestBook

Cancel reply