Message

Message： I tried running a file and the post-processor file was erased. When it created the gcode for the file, the conversion from inches to mm is off by almost 2.5x. I tried restarting, reinstalling the program, still it does the same thing. I am using version 10 Matt Abel 2021/03/19

Reply： before reinstal ucancam. you need to uninstall the old ucancam. ( 2021/03/19 )

Message： hellow!I am using ucancam V8.today I get the message ‘failed to create empty file’.till today everything was working fine.please help me, I need to get it work.thx ILie 2021/03/10

Reply： pls uninstall , and install again. ( 2021/03/10 )

Message： Olá, nós trabalhamos com Aspire, gostaria de trocar para o Ucancan. Queria saber qual versão posso trabalhar? Ucancam Versão Padrão V11.5 ou Ucancam Pro Versão V11.5 ? Nós trabalhamos com O MACH3. LEONEL RAMIRO DA 2021/03/08

Reply： Hi if you need surface and relief function. ucacnam pro is OK. if not , ucancam standard is enough. ( 2021/03/08 )

Message： Hello, is Ucancam able to set files to the A2mc router? Is there a post processor made for this machine ou it needs any adjustment? Roger 2021/03/08

Reply： we are not familar with A2mc router , you can modify the post processor in ucancam. ( 2021/03/08 )

Message： Hello, I would like to ask, if there is a translation of UCANCAM V11 into Polish language? Roman 2021/03/08

Reply： yes, you can contact with digima company in polish ( 2021/03/08 )

Message： Hello. Does ucancam has stats like Enroute? I mean to see how long will it take before starting to cut. Pedro 2021/03/01

Reply： yes, there is stats in ucancam. ( 2021/03/01 )

Message： Hello. To work on a CNC machine, I need the program Ucancam Pro version 11.5. I can download this program from your website, and where can I buy a key for this program? Dmitriy 2021/02/25

Reply： you can buy from http://www.ucancam.com/purchasing.asp ( 2021/02/25 )

Message： Hello, I need Ucancam V10.7 software installatioon file. I have dongle but not have setup file. Please help. Thanks. Tanzer 2021/02/19

Reply： you can download http://www.ucancam.com/V11.4-Ucancam-Eng.rar to try ( 2021/02/19 )

Message： Hi I am strugling to cut my files , the size is way below maximum table size but it still errors on y+ over soft limit. checked work bound and this size is about 2 x drawing size. please help Remondo 2021/02/19

Reply： pls check the origin point when you export nc code.make sure it is not far away the part. ( 2021/02/19 )

Message： Getting a message “failed to create empty document” on start up Verdun 2021/02/19

Reply： your dongle is not matched with ucancam version. ( 2021/02/19 )

GuestBook

Cancel reply