GuestBook

Your email address will not be published. Required fields are marked *

*

*

*

  1. Message： I click “view”–>system settings->general, then click default config.(2008-4-28) but it is not help the program stil closing Levon 2008/04/29
    1. Reply： pls turn to your supplier for help or send the dongle back ( 2008/04/29 )
  2. Message： hi I bought ucancam v8 software with cnc engraver it work normali but now when I importing any file the software automaticaly closing. I try to other computers same hapend I think something is wrong with dongle(the card that caming with cd)plise help me what I need to do Levon 2008/04/28
    1. Reply： We support 1 years warranty。 Try to click “view”–>system settings->general, then click default config. ( 2008/04/28 )
  3. Message： How do you get the cursor to turn back into a cursor, after, for example, selecting the circle drawing tool and you then want to turn the tool back into the cursor, (to hold down control and drag a line through it to select it)how do you turn it back to a cursor? P.S. your software is just great, easy to learn. I have never used software to program cnc before and this is so easy to learn and use. Thanks Mike 2008/04/18
    1. Reply： Thank you! Just single click your right mouse pointer ( 2008/04/18 )
  4. Message： “Hi,I got engraving machine fro creation .but I don’t know anything about ucancam . Can u help me out about Y axis setting & Tool Setting . Plzzzz it’s UrgentThank You” sandeep 2008/04/17
    1. Reply： Generalling speaking, the default value is optimal, also you can change it according to your experience. We suggest you to have a look at the DEMO first. ( 2008/04/17 )
  5. Message： Hi we purchassed your software from ebay, when we received it we have the Artcut software but we only receive one CD, I have found out that we need the second CD. The CD we have is the one on the left hand side English/German Version. How can I get the other CD on the right hand side. George 2008/04/11
    1. Reply： Our software includes 2 cds, pls order it from us ( 2008/04/11 )
  6. Message： hi,I have a rabbit plotter 360. I worked with artcut2005 very well, till now. The Artcut programm, won’t start anymore and askes for the 2end cd. Wenn I insert this white cd (with KONA written on it), nothing happens. Even not wen I press the OK botton. How can I get Artcut to work again?? Claudia claudia 2008/04/11
    1. Reply： pls insert the graphic disk ( 2008/04/11 )
  7. Message： Hi . I am having problems importing DXF files into Ucancam. If I have drawn anything with circles in our drawing programme and then deleted part of the circle, I then export it in DXF and import it into Ucancam it opens showing the deleted parts of the circles. Can you please help M Evans 2008/04/09
    1. Reply： hello, pls export your .dxf files as R12 or 2000 format ( 2008/04/09 )
  8. Message： hi there , problem with artcut cutting plotter 1360, can open software but does not cut vniyl on printer (communication to printer)please assist I am running windows XP , do I need special drivers or must I also install service pack 1 or 2 ASH 2008/04/09
    1. Reply： hello my friend, we are the manufacturer of the software only, and you should select the model of you machine accordingly. We can work on 98, 2000, XP, Vista, no matter SP1 , SP2, or the SP3 at hand.If your windows is not 98, pls click cut\plot–>setup–> sequential control, check the 2nd and 3rd option. ( 2008/04/09 )
  9. Message： “”hi there… I just want to ask a few questions about your software ucancam V8 1. Is this software compatible with my engraving machines LIDAR D-5070?? Because the machines still use LPT1 Port as source to transfer data. 2. For the time being I still use the WENTAI Artgrave 2002 programs to engrave. Is there any suggestions which other sofware except above that compatible with my machines>>??Thx!!” Sandy 2008/04/08
    1. Reply： “If you are using Artgrave 2002 Software to transfer the date, I think it is the very software you need. And if your machine has its own output software, you can use Ucancam V8 to generate the G code, then use output software to transfer date.” ( 2008/04/08 )
  10. Message： will it work on windows vista please I seem to be having problems with it thanks paul foxy 2008/04/08
    1. Reply： UCanCAM V8 software can not wotk on Vista yet. ( 2008/04/08 )

About us

Ucancam Team is based in Beijing of China, a professional developer of CAD/CAM software. Ucancam Corp. owns intellectual property right of all the Ucancam/Ucannest/Ucansign series software.

Contact us

Add：Room1016, No.33 Suzhou Street, Haidian District, Beijing, China
Tel：010-82684988 82684926
QQ：747 843 889
Email：sales@ucancam.com

Copyright@2022 Ucancam Team is based in Beijing of China