Message

Message： I bought a printer from the company cotek. They came with software version 8.7 ucancam. After I successfully installed. run error “The dongle not found”. Can you please help me. thai 2010/06/30

Reply： Dear sir Would you ple uninstall and reinstall the software or u may try on another computer. Then when you has installed , pls check the ” Equipment supervisor “(My COMPUTER – ATTRIBUTE-HARDWARE- Equipment supervisor-Jungo)if the “Dog key”&”Windriver”are all available . If there is only the “WinDriver”, then you may need to change for a new dongle. For more send me a messgae to : Sales@ucancam.com ( 2010/06/30 )

Message： hello;we are using ucancam v8.ı want to import the 3D drawing from solidworks or catia. can ı do this with ucancam ? ali 2010/06/29

Reply： Hello sir, sorry for my late reply. For your 3D drawings, only our Pro. Can be imported .Then if you are using V8 3D Engraving or Waveboard ，the drawings cannot be imported . You can try our new version V9 Pro, which is composed of the original 3 kinds of engraving software. For more you may view our web or contact me via Skype or email of sales ,thank you ! ( 2010/06/29 )

Message： hi, ı am using ucancam v8. i want to ucancam v9 upgrade. for windows vista. whree is the upgrade file download ? naci 2010/06/29

Reply： hello sir ,sorry for the download , as V9 has been greatly updated and the original V8 dongle is not adaptable to V9 . If you hope to update your software to V9, you can contact me and buy a new set .Thank you so much ! ( 2010/06/29 )

Message： hello as they are, we finished buying to router cnc with the program ucancam v8, but at the time of trying to install it appears to us this legend An I/o error ocurred while installing a file. This is normally caused by bad installation media or a corrup installation file.and one does not settle, An I/o error ocurred while installing a file. This is normally caused by bad installation media or a corrup installation file.can help us, greetings David 2010/06/22

Reply： I cannot catch your mind clearly ,would pls explain me clearly or send me a picture to show the problem . My mail: Sales@ucancam.com Skype :ucancam_sales ( 2010/06/22 )

Message： hola tengo una pieza de 1000 por 1500 cortada quiero hacer un bajo relieve dentro de esa pieza en el centro lo que me sale es el corte al inicio de la pieza ayudarme porfavor omar 2010/06/22

Reply： Send me a message :Sales@ucancam.com or ask the friend in Xinjiang to contact me . Best regards ! Serena ( 2010/06/22 )

Message： Hi there,I have been using the Ucancam V8 for my router from last two years.But, suddenly, when I start my work today i saw some unusual behaviour. Whenever I am doing the profile machining by making inside, it is drawing the line outside and by making outside, it is drawing the line inside. Anybody help me tosort out this problem. Even I Uninstall the prog once and reinstall again but am facing teh same problem Mohammed 2010/06/22

Reply： Hi Oman The problem may result from two reasons:1,the graphic is not completely closed . 2,the graphic has overlaps Solution :Choosing menu “Modify”–“Delete overlay loop ” Then it’ll be ok. Pls try and for more problem ,come to us ! Best regards ! Serena ( 2010/06/22 )

Message： Urgent, please helpe me. I’ve got a Dungle who fails to respond to open software (Ucancam V8).Apparently it is blocked. What should I do? DHRAIEF 2010/06/22

Reply： Dear sir Would you ple uninstall and reinstall the software or u may try on another computer. Then when you has installed , pls check the ” Equipment supervisor “(My COMPUTER – ATTRIBUTE-HARDWARE- Equipment supervisor-Jungo)if the “Dog key”&”Windriver”are all available . If there is only the “WinDriver”, then you may need to change for a new dongle. For more send me a messgae to : Sales@ucancam.com ( 2010/06/22 )

Message： Thankyou for your reply on User Forum but I can not retreive the original message you sent and as you say; hello，I have sent you messages, please view your mailbox1 and I ask where do I find it as it did not arrive here as an email.Thanks for your assistance. John Fulljames, NZ. John Fulljames 2010/06/03

Reply： hello, John Fulljames, I have sent messages to your mailbox orewaframe@xtra.co.nz, Please verify your email address. ( 2010/06/03 )

Message： hello!!…i have some problems with ucancam v8.I’m working with a cnc engraving machine that have Ucancam software and another program called Ncstudio. Well, when I save e text or an image with ucancam, it save me as “.ucc” file, while Ncstudio only read “.nc” files… how can i convert ucc file into nc file?best regards francesco 2010/06/01

Reply： hello, first draw the design in UcanCam, then Select machining path function in toolpath menu，and create toolpath, then save it as G-code in toolpath->output，use the NCStudio output the G-code to your machine. ( 2010/06/01 )

Message： Hello,Approxomatly two weeks ago I submitted an email to you re getting started on our 1325 CNC Router using Ucancam V8 and a DSP control but as to date I have not had a reply and ask if or when I can expect to receive same. John Fulljames 2010/05/31

Reply： hello，I have sent you messages, please view your mailbox! ( 2010/05/31 )

GuestBook

Cancel reply