Finish Contour

Finish Contour machining can promote the machining speed in the same horizontal plane with Z-axis invariable. Besides, partial contour can also be carried out via limiting the machining range and depth. Tool-path is fitted into arc which reduces the G-codes and improves machining efficiency. This is mainly used for high-speed milling machines.

---

       Command:

       Menu【Toolpath > Surface Finish > Finish contour】

---

Steps:

1. Select  surface.

2. Click Menu【Toolpath > Surface Finish > Finish contour】

      3. Set the parameters, click OK button.

Parameters:

Total depth of Machining: the actual total depth of machining required

Max depth of Surface: the max depth generated automatically;

Stepdown: distance between contours (the smaller, the more precise);

Clearance: you can set surface remain which is the shortest distance between the original surface and surface after carving.

Direction for closed contour: Climb is clockwise, Conventional is anti-clockwise.

Order: you may choose Top to Btm or Btm to Top.

        

          Top to Btm                                                                                Btm to Top

Contour path’s three transition ways between layers:

        1.High-speed machining: arc transition ensures the whole machining at high speed without slowing down and this greatly supports high-speed milling.

        2.Ramp transition: ramp transition increases machining speed of general milling.

     3. Line transition: line transition prevents over-cutting.