-
Feature
-
Interface
-
File Operation
-
Design Central
-
Basic Setting
-
Viewing Tools
-
Object Operation
-
Drawing
-
Parametric
-
Graph Editing
-
Graph Transform
- Move
- rotate
- Transform Again
- Mirror
- Arc and Line Fit
- Envelop Distortion
- Perspective Distortion
- Push and Pull Distortion
- Twist Distortion
- Shadow Distortion
- Curve Zmap
- Auto Nesting
- Interactive Nesting
- Clone Along a Curve
- Rectangular Clone&Polar Clone
- Clone along a Line
- Clone along an Arc
- Clone along a Spiral
- Scale 2 Points
- Orient 2 lines
-
Image Processing
-
Text Editing
-
Node Editing
-
Graph Toolpath
- Tool Path
- Profile Machining
- Area Clearance
- Flute Machining
- 3D Corner Engraving
- Midine Machining
- Drilling
- Insert And Inlay
- Intelligent Machining
- Prism Machining
- Embossing Machining
- Toolpath output
- Tool Management
- Toolpath Walk Simulation
- Toolpath Shaded Simulation
- Post Set
- Toolpath Regenerate
- Toolpath Stat
- Chamfer Machining
- Adaptive Area Clearance
-
Image Toolpath
-
Wireframe Toolpath
-
Toolpath Edit
-
Waveboard
-
Relief
-
Surface
-
Surface Toolpath
Surface Rough Parallel
Command:
Menu【Toolpath > Surface Rough > Rough parallel】
Steps:
1. Select surface.
2. Menu【Toolpath > Surface Rough > Rough parallel】
3. Set the parameters, click OK button.
Parameters:
Total depth of Machining: the actual total depth of machining required ;
Max depth of Surface: the max depth of surface is to machine.
Layer depth: depth of each layer.
![](/wp-content/uploads/2023/11/20231107164923_45066.png)
Clearance: you can set surface remain which is the shortest distance between the original surface and surface after carving.
Rate:is the ratio of the width of the tool bottom blade to the width of the last tool path.
Angle of Line out: is the angle formed by horizontal direction and the tool when it moving on material.
Angle 0 Angle 30
On way mill: Machining in one direction.
You also can machine the region in boundary curve.
E.g. select sphere and rectangle and click【Toolpath > Surface Rough > Rough parallel】,after setting parameters, press OK, the toolpath is shown. The region in rectangle is machined.